[TV] Re: Sony KV35S65

["david kubick" <davidkubick@xxxxxxxxxx>]

try replacing the vertical output ic. this can cause the hivoltage to shut
down.
----- Original Message -----
From: "Wayman Simmang Sr." <waymansr@xxxxxxxxxxxxx>
To: <tv@xxxxxxxxxxxxxxx>
Sent: Wednesday, October 06, 2004 2:31 PM
Subject: [TV] Re: Sony KV35S65


> Hi Guys: Have asked for help on this one before and feel sheepish to ask
again. Its on a Sony KV35S65 Chassis # SCC-S07M-A.
> The set will cut the high voltage off and leave the sound on after a
minute or less. Thereby losing any other voltages derived from the flyback.
No fuses blow but sound and station selector work changing channels is OK
too.
>
> I have checked the voltage feeding the I.C. 351 which generates the
horizontal drive, thinking it might be being cut off, but Pin #34 keeps the
9V. on it. I then replaced the IC351 chip and no change. When this happens
you have to kill the AC input to the set so that it can re-set. Then you can
go thru the whole thing all over again. I have tried changing the setting on
the screen control and it works OK for a minute or two. The whole problem is
that I dont have any clues as to whether it is the HOT or the Driver
transistor or the Flyback or some condition that cuts the drive off.
>
> If anyone would be kind enough and has access to WinsTips I would
certainly appreciate some help. I have had this set for months and the
customer has another set and a lot of patience.
>
> It might be an IK problem(but I dont think so) and it might be in the
Automatic Brightness Level circuit but I cant find anything wrong mostly
because when the flyback quits there is nothing to check in these areas and
there isnt enough time that it works to find the problem. The Regulator
Keeps a constant 135V. Regulator was replaced. I replaced the driver
transistor but havent replaced the HOT.
>
> Thank you for any help......WinsTips please.  Help!!!
> Wayman at Simmang's TV
> --------------------------------------------------------------------------
----------
> TV email Archives at: http://www.circuitwork.com/archive/TV/
> To remove yourself: Email tv-request@xxxxxxxxxxxxxxx with remove as the
subject.
> Sent VIA Tech Assist's email server- tv@xxxxxxxxxxxxxxx
> --------------------------------------------------------------------------
----------
>

------------------------------------------------------------------------------------
TV email Archives at: http://www.circuitwork.com/archive/TV/
To remove yourself: Email tv-request@xxxxxxxxxxxxxxx with remove as the subject.
Sent VIA Tech Assist's email server- tv@xxxxxxxxxxxxxxx
------------------------------------------------------------------------------------