[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TV] Re: no power Zenith 32 inch 9-1617-1 main module
Cy some tips here..Eric
> Zenith 9-1617-1 DEAD Reg driver - QX3404, shorted (121-1348); RX3406, 47ohm@1/2w burned open; ICX3431-2/3=open; THEN still no start.. CR3420, 200V@330uf overheats/smokes; Replace RX3409, 4.7ohm@1/2w=open, NE corner reg sink; tech232
> TELEVISION ZENITH 9-1617-1 intermintant start up c3416 100mfd 25v cap test good but relace it
Eric
E M Electronics
59 Wights Rd
Deer Lake NL
Canada
A8A 2J2
Ph# 709 635 5023
tvman@xxxxxxxxxxxxxxx
eric.manuel@xxxxxxxxx
TechAssist Member 2002
number6@xxxxxxx wrote:
> Hello,
> A friend tech is working on this.
> CX3418 has ben replaced before but do not know when.
> Fuses all ok.
> Any clues what else to check.
> Thanks
> Cy
> Cy Van D.
> Electronic Repair
> 119 E. Main St.
> Anamosa, IA 52205
> -------------------------------------------------------------------------------
> To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
> TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
> TV email Archives at: http://www.circuitwork.com/archive/TV/
> Join our Pro only site, with a Professional Only email list:
> http://tech-assist.org/register.htm
> -------------------------------------------------------------------------------
> TV email Archives at: http://www.circuitwork.com/archive/TV.
> ------------------------------------------------------
>
>
-------------------------------------------------------------------------------
To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
TV email Archives at: http://www.circuitwork.com/archive/TV/
Join our Pro only site, with a Professional Only email list:
http://tech-assist.org/register.htm
-------------------------------------------------------------------------------
TV email Archives at: http://www.circuitwork.com/archive/TV.
------------------------------------------------------