[TV] Re: Re; coolant leak. photo

[donlfixit@xxxxxxxxxxxxx]

Ok here's what I got so far and what I will attempt (see photo) At the
centerof the CRT assembly there is a "larger then the rest" philips type
screw, located in a box shaped portion of the assy, it is in the lower left
hand corner of this box, to the right of the screw are two dots, one red one
white. Question: is this screw a "port hole" for the coolant? and if so will
removing this screw release the old coolant? If so removing the old coolant
will make this a lot less sloppy.   Next, in the photo there are two of the
four "spring loaded screws" visable, I remove all 4 next and this should
brake the old "damaged" seal & release the upper part of the assy which
holdsthe lens.   Next, put the lens half asside clean the coolant well with
distilled water replace the seal with 100% silacone, put the lens half of
theassy back on and let dry for a day.   Next, once sealant is dry refill
thewell with new coolant and put the screw back in and check for leaks, if
noleaks I am done.   Am I missing anything?? Just want to be sure, Thanks!
Don   ----- Original Message -----
From: Terry Johnson 
Date: Monday, July 31, 2006 2:57 pm
Subject: [TV] Re: Re; coolant leak.
To: tv@xxxxxxxxxxxxxxx
>
>Ok Don, I don't usually change the gasket/seal neither, but 
>sometimes it 
>isn't wise to take chances if you've never done one before. I'm 
>sure you 
>will be ok as you understand all the factors. Have a good day 
>and take care 
>of yourself.....
>
>Terry Johnson
>Valley T.V. &Electronics
>5510 Hwy. 1, RR 1
>Waterville, N.S.
>B0P 1V0
>(ph:) 902-538-7555
>(fx:) 902-538-7447
>TechAssist "B" Mbr. 2005
>E-MAIL terryj@xxxxxxxxxxxx
>
>----- Original Message ----- 
>From: 
>To: 
>Sent: Monday, July 31, 2006 1:10 PM
>Subject: [TV] Re: Re; coolant leak.
>
>
>>
>>Hello Terry, I remember you sending me some info on this 
>before with the 
>>last posting, I had asked about the sealer, I have a silocone 
>adhiseve 
>>which if I remember correctly I was told ok to use as long as 
>it can 
>>handle the heat, I believe we determined it can. Now I have 
>the CRT here. 
>>Funny all these years in the business and never did this, most 
>city 
>>dwellers do not have projos.
>>I did not know there is a kit, all I have is the new coolant 
>and the 
>>sealer. Someone told me not to worry about the gasket as they 
>usualy dont 
>>need replaceing.
>>By the way you should know (I intend to post this but not yet) 
>I am 
>>retiring after this set and one other here in the shop. I 
>moved to the 
>>cuntry and there is just not enough work. I am goimg into 
>another line of 
>>work that TV shope may be interested in, there will be a baner 
>at the tech 
>>assist site, look for it!!!
>>Don
>><:{{{><
>>----- Original Message -----
>>From: Terry Johnson
>>Date: Monday, July 31, 2006 8:54 am
>>Subject: [TV] Re; coolant leak.
>>To: tv@xxxxxxxxxxxxxxx
>>
>>>
>>>Firstly, " DO NOT REMOVE WHAT THE SAY NOT TO" . You will need to
>>>get a kit generally speaking, and it'l give you instructions on
>>>what and how to do it.
>>>Terry Johnson
>>>Valley T.V. &Electronics
>>>5510 Hwy. 1, RR 1
>>>Waterville, N.S.
>>>B0P 1V0
>>>(ph:) 902-538-7555
>>>(fx:) 902-538-7447
>>>TechAssist "B" Mbr. 2005
>>>E-MAIL terryj@xxxxxxxxxxxx
>>>
>>>
>>>--------------------------------------------------------------
>---
>>>--------------
>>>To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
>>>TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
>>>TV email Archives at: http://www.circuitwork.com/archive/TV/
>>>Join our Pro only site, with a Professional Only email list:
>>>http://tech-assist.org/register.htm
>>>--------------------------------------------------------------
>---
>>>-------------- 
>>>TV email Archives at: http://www.circuitwork.com/archive/TV.
>>>------------------------------------------------------
>>>
>>>
>>
>>
>>---------------------------------------------------------------
>----------------
>>To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
>>TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
>>TV email Archives at: http://www.circuitwork.com/archive/TV/
>>Join our Pro only site, with a Professional Only email list:
>>http://tech-assist.org/register.htm
>>---------------------------------------------------------------
>----------------
>>TV email Archives at: http://www.circuitwork.com/archive/TV.
>>------------------------------------------------------
>>
>-----------------------------------------------------------------
>--------------
>To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
>TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
>TV email Archives at: http://www.circuitwork.com/archive/TV/
>Join our Pro only site, with a Professional Only email list:
>http://tech-assist.org/register.htm
>-----------------------------------------------------------------
>-------------- 
>TV email Archives at: http://www.circuitwork.com/archive/TV.
>------------------------------------------------------
>
>

-- Binary/unsupported file stripped by Ecartis --
-- Type: image/jpeg
-- File: 000_0410.JPG


-------------------------------------------------------------------------------
To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
TV email Archives at: http://www.circuitwork.com/archive/TV/
Join our Pro only site, with a Professional Only email list:
http://tech-assist.org/register.htm
------------------------------------------------------------------------------- 
TV email Archives at: http://www.circuitwork.com/archive/TV.
------------------------------------------------------