[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TV] Re: Re; coolant leak. photo
Pretty much, the only thing left is to fire up the chassis to let it get hot
and when the coolant expands there shoudn't be any discharge / leakage. Good
luck, I've never had any that leaked after reassembly.
Terry Johnson
Valley T.V. & Electronics
5510 Hwy. 1, RR 1
Waterville, N.S.
B0P 1V0
(ph:) 902-538-7555
(fx:) 902-538-7447
TechAssist "B" Mbr. 2005
E-MAIL terryj@xxxxxxxxxxxx
----- Original Message -----
From: <donlfixit@xxxxxxxxxxxxx>
To: <tv@xxxxxxxxxxxxxxx>
Sent: Thursday, August 03, 2006 9:20 AM
Subject: [TV] Re: Re; coolant leak. photo
>
> Ok here's what I got so far and what I will attempt (see photo) At the
> centerof the CRT assembly there is a "larger then the rest" philips type
> screw, located in a box shaped portion of the assy, it is in the lower
> left
> hand corner of this box, to the right of the screw are two dots, one red
> one
> white. Question: is this screw a "port hole" for the coolant? and if so
> will
> removing this screw release the old coolant? If so removing the old
> coolant
> will make this a lot less sloppy. Next, in the photo there are two of
> the
> four "spring loaded screws" visable, I remove all 4 next and this should
> brake the old "damaged" seal & release the upper part of the assy which
> holdsthe lens. Next, put the lens half asside clean the coolant well
> with
> distilled water replace the seal with 100% silacone, put the lens half of
> theassy back on and let dry for a day. Next, once sealant is dry refill
> thewell with new coolant and put the screw back in and check for leaks, if
> noleaks I am done. Am I missing anything?? Just want to be sure, Thanks!
> Don ----- Original Message -----
> From: Terry Johnson
> Date: Monday, July 31, 2006 2:57 pm
> Subject: [TV] Re: Re; coolant leak.
> To: tv@xxxxxxxxxxxxxxx
>>
>>Ok Don, I don't usually change the gasket/seal neither, but
>>sometimes it
>>isn't wise to take chances if you've never done one before. I'm
>>sure you
>>will be ok as you understand all the factors. Have a good day
>>and take care
>>of yourself.....
>>
>>Terry Johnson
>>Valley T.V. &Electronics
>>5510 Hwy. 1, RR 1
>>Waterville, N.S.
>>B0P 1V0
>>(ph:) 902-538-7555
>>(fx:) 902-538-7447
>>TechAssist "B" Mbr. 2005
>>E-MAIL terryj@xxxxxxxxxxxx
>>
>>----- Original Message -----
>>From:
>>To:
>>Sent: Monday, July 31, 2006 1:10 PM
>>Subject: [TV] Re: Re; coolant leak.
>>
>>
>>>
>>>Hello Terry, I remember you sending me some info on this
>>before with the
>>>last posting, I had asked about the sealer, I have a silocone
>>adhiseve
>>>which if I remember correctly I was told ok to use as long as
>>it can
>>>handle the heat, I believe we determined it can. Now I have
>>the CRT here.
>>>Funny all these years in the business and never did this, most
>>city
>>>dwellers do not have projos.
>>>I did not know there is a kit, all I have is the new coolant
>>and the
>>>sealer. Someone told me not to worry about the gasket as they
>>usualy dont
>>>need replaceing.
>>>By the way you should know (I intend to post this but not yet)
>>I am
>>>retiring after this set and one other here in the shop. I
>>moved to the
>>>cuntry and there is just not enough work. I am goimg into
>>another line of
>>>work that TV shope may be interested in, there will be a baner
>>at the tech
>>>assist site, look for it!!!
>>>Don
>>><:{{{><
>>>----- Original Message -----
>>>From: Terry Johnson
>>>Date: Monday, July 31, 2006 8:54 am
>>>Subject: [TV] Re; coolant leak.
>>>To: tv@xxxxxxxxxxxxxxx
>>>
>>>>
>>>>Firstly, " DO NOT REMOVE WHAT THE SAY NOT TO" . You will need to
>>>>get a kit generally speaking, and it'l give you instructions on
>>>>what and how to do it.
>>>>Terry Johnson
>>>>Valley T.V. &Electronics
>>>>5510 Hwy. 1, RR 1
>>>>Waterville, N.S.
>>>>B0P 1V0
>>>>(ph:) 902-538-7555
>>>>(fx:) 902-538-7447
>>>>TechAssist "B" Mbr. 2005
>>>>E-MAIL terryj@xxxxxxxxxxxx
>>>>
>>>>
>>>>--------------------------------------------------------------
>>---
>>>>--------------
>>>>To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
>>>>TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
>>>>TV email Archives at: http://www.circuitwork.com/archive/TV/
>>>>Join our Pro only site, with a Professional Only email list:
>>>>http://tech-assist.org/register.htm
>>>>--------------------------------------------------------------
>>---
>>>>--------------
>>>>TV email Archives at: http://www.circuitwork.com/archive/TV.
>>>>------------------------------------------------------
>>>>
>>>>
>>>
>>>
>>>---------------------------------------------------------------
>>----------------
>>>To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
>>>TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
>>>TV email Archives at: http://www.circuitwork.com/archive/TV/
>>>Join our Pro only site, with a Professional Only email list:
>>>http://tech-assist.org/register.htm
>>>---------------------------------------------------------------
>>----------------
>>>TV email Archives at: http://www.circuitwork.com/archive/TV.
>>>------------------------------------------------------
>>>
>>-----------------------------------------------------------------
>>--------------
>>To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
>>TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
>>TV email Archives at: http://www.circuitwork.com/archive/TV/
>>Join our Pro only site, with a Professional Only email list:
>>http://tech-assist.org/register.htm
>>-----------------------------------------------------------------
>>--------------
>>TV email Archives at: http://www.circuitwork.com/archive/TV.
>>------------------------------------------------------
>>
>>
>
> -- Binary/unsupported file stripped by Ecartis --
> -- Type: image/jpeg
> -- File: 000_0410.JPG
>
>
> -------------------------------------------------------------------------------
> To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
> TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
> TV email Archives at: http://www.circuitwork.com/archive/TV/
> Join our Pro only site, with a Professional Only email list:
> http://tech-assist.org/register.htm
> -------------------------------------------------------------------------------
> TV email Archives at: http://www.circuitwork.com/archive/TV.
> ------------------------------------------------------
>
-------------------------------------------------------------------------------
To remove yourself DO NOT Email TV@xxxxxxxxxxxxxxx you MUST email
TV-REQUEST@xxxxxxxxxxxxxxx with REMOVE as the subject.
TV email Archives at: http://www.circuitwork.com/archive/TV/
Join our Pro only site, with a Professional Only email list:
http://tech-assist.org/register.htm
-------------------------------------------------------------------------------
TV email Archives at: http://www.circuitwork.com/archive/TV.
------------------------------------------------------