[TV] Philips Projo -

[Ker Rescue <ker61@xxxxxxxxx>]

Good Afternoon Fellow Techs.

I have a Philips, Model#"9P6040 C101"  Chassis # PTV843, which was worked on by another shop...and had no power, with damage to the deflection board.  We ordered a reman Deflection board, and after installing, we discovered the primary power supply fires up, but the tubes will not light.  Upon closer discovery we found two blown pico fuses on the Deflection board, and a burned resistor on the large signal board next to the deflection board...It appeared to be a 100 ohm, 1/8 watt next to jumper wire 1053.  Disconnecting the convergence board yields no joy either...

If anyone has any suggestions, It would be a great help, as we are at the wall on this on.

Thanks In Advance
  

Matt



      
---------------------------------------------------------------------------
To remove or add email address http://www.circuitwork.com/join.htm

Join our Pro only site, with a Professional Only email list:
http://tech-assist.org/register.htm
---------------------------------------------------------------------------

TV email Archives at: http://www.circuitwork.com/archive/TV.
------------------------------------------------------