[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TV] Re: PT-47WXC43G
There are many tips on C509. A few techs stated that it was advisable to
use the OEM. I have done as you did and used a .47uF 250V.
Eric
Rick Electronics
-------------------------------------------------------------------------
In a message dated 11/6/2009 6:23:12 P.M. Eastern Standard Time,
rods@xxxxxxxxxxxxx writes:
Hello,
Had this set in about 2 weeks ago.very narrow picture. C509, .47uf,250v
mylar cap open. Didn't have a 250v, so I used a 400v.
Customer said set worked only a few days and then back to original problem.
C509 bad again, this time the side was blown out. I check all other mylar
caps in this area of the circuit as well as dual diode.everything checked
out o.k. Any ideas why this cap failed again? Incidentally, I replace cap
again, this time with .47uf,630v mylar and everything seems fine.
Can I safely return to customer, assuming I had installed a defective or
inferior quality cap?
Thanks,
Rod Stebelton
Electronic Supply Company
Lancaster/Columbus, Ohio
rods@xxxxxxxxxxxxx
View our line card: <http://www.edge-group.com/pubs/esco/ecb09/>
http://www.edge-group.com/pubs/esco/ecb09/
........................................................................
Help us Populate the Free Repair Forum:
http://www.circuitwork.com/techassist/smf
---------------------------------------------------------------------------
To remove or add email address http://www.circuitwork.com/join.htm
Join our Pro only site, with a Professional Only email list:
http://tech-assist.org/register.htm
---------------------------------------------------------------------------
TV email Archives at: http://www.circuitwork.com/archive/TV.
------------------------------------------------------
........................................................................
Help us Populate the Free Repair Forum:
http://www.circuitwork.com/techassist/smf
---------------------------------------------------------------------------
To remove or add email address http://www.circuitwork.com/join.htm
Join our Pro only site, with a Professional Only email list:
http://tech-assist.org/register.htm
---------------------------------------------------------------------------
TV email Archives at: http://www.circuitwork.com/archive/TV.
------------------------------------------------------